Viper 771XV Owner Manual - Page 42
programming options
View all Viper 771XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Mode, the in-vehicle status LED will come back on the next time the ignition is turned on and then back off. programming options Programming options control your system's normal, operational set-up. Most options do not require additional parts, but some may require installation labor. The following is a list of the programmable options, with the factory settings in Bold. ➤ Active arming (2-way remote only) or passive arming (automatic arming 30 seconds after the last door has been closed). ➤ Arming/disarming siren chirps on or off. ➤ The ignition controlled door lock feature on or off: When this feature is programmed on, the doors will lock three seconds after the ignition is turned on, and unlock when the ignition is turned off. If your installer is programming the security system with the Directed Bitwriter, ignition lock and unlock are independent features that can be programmed separately. ➤ Passive door locking (with passive arming) or active door locking (only when arming with the 2-way remote). Passive locking allows the vehicle's doors to lock when the security system passively arms (after the 30-second countdown). This feature only works if passive arming has been programmed. © 2005 directed electronics-all rights reserved 39