Viper VSS5000 Owner Manual - Page 12

Remote and System operations Passive arming/locking The system can be programmed to arm/lock itself automatically (called passive arming/locking). If the system is programmed for passive arming/ locking, it will automatically arm/lock 30 seconds after the ignition is turned off and the system detects that you have left the vehicle by opening and closing a door. Whenever the system is in its 30-second passive arming/locking countdown, the status LED will flash twice as fast as it does when the system is armed/locked. At the 20-second point of the countdown, the siren/horn will sound to indicate that the system is about to arm/lock. At the 30-second point, the parking lights will flash to indicate that the system is armed/locked. Note: If any protected entry point (such as a door or a switch-protected trunk or hood) is open, the system will not passively arm/lock (unless forced passive arming/locking is programmed on). See Programming Options section in the expanded version of this manual online at www. automatecarsecurity.com.. Warn away® response A Warn Away Response consists of an alarm page along with the responses described below. • Shock Sensor - Light impacts to the vehicle will flash the vehicle lights and sound the siren/horn for a few seconds. Triggered response A Triggered Response can be activated by any of the triggers listed below. The default Triggered Response duration is 30 seconds but can be programmed from 1-180 seconds by your installer. 8 © 2010 Directed Electronics. All rights reserved.