Viper VSS5000 Owner Manual - Page 17

the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle. Warning! (1) Never remote start your vehicle when the keys are in the ignition, except when performing Valet® Take-Over, and (2) Never start the vehicle if it is not in PARK or NEUTRAL To remote start the vehicle: • Press on the remote control once. The parking lights flash to confirm that the vehicle will attempt to start. With gas vehicles the engine starts 4 seconds after the parking lights flash. With diesel vehicles the engine starts when the WAIT-TO-START indicator on the dashboard goes out or the programmed delay has ended. Once the vehicle has started, it runs for the pre-programmed period of time or until a shutdown input is triggered. Warning! It is unsafe to operate a vehicle's motor in a garage or other closed off area. Breathing the exhaust from the vehicle is hazardous to your health. Never activate the remote start in an enclosed space. When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the On position. 2. Press the brake pedal. Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. © 2010 Directed Electronics. All rights reserved. 13