Viper VSS5000 Owner Manual - Page 15

If the system is triggered and the siren has been sounding for longer than six seconds, pressing on the remote silences the siren while keeping the system in the armed state. The system does not disarm, but resets. Pressing again after silencing the system will disarm the system. If the system is triggered and the siren has been sounding for less than six seconds, pressing disarms the system. The six second timer is provided for your convenience, in case the system is accidentally triggered. System Override If your remote control is lost or damaged, you can manually disarm your vehicle security system or disable an optional starter kill. To disarm or disable the system without a remote control, you must have the vehicle's ignition key. To disarm/disable the system: 1. Turn the ignition to the ON position. 2. Press the control center button the preset number of times (one to five times) within 15 seconds. The factory default setting is 1 press. After five seconds, the system will disarm/disable. If the system does not disarm/disable, you may have waited too long. Start over by turning the ignition off and on. Number of Presses Important: The control center button can be programmed to respond to 1-5 presses for the disarm/disable function. You must check with the installer to verify the programming for your individual unit. © 2010 Directed Electronics. All rights reserved. 11