Viper VSS5000 Owner Manual - Page 8
Basic Commands - alarm
View all Viper VSS5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Basic Commands Arm/Lock Press and release The alarm arms, doors lock (if connected), and the siren/horn sounds and parking lights flash once. If Valet mode* is On, the doors lock. Exit Valet mode to arm/lock the alarm normally. To Arm/lock and Panic Press and hold The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the siren/horn and flashes the parking lights. Disarm/Unlock Press and release The alarm disarms, doors unlock (if connected), and the siren/horn sounds and parking lights flash twice. Turns panic off if on. If Valet mode* is On, the doors unlock. AUX Press and release Perform before the Arm/lock or Disarm/unlock command to use the remote control in Silent Mode™. Note: The Warn away response to lighter impacts is bypassed if the system is armed using silent mode. this ensures that no chirps are emitted by the siren in an area you want chirp -free but the system is fully capable of triggering. 4 © 2010 Directed Electronics. All rights reserved.