Vizio SV421XVT SV471XVT HDTV User Manual - Page 10

VIZIO SV421XVT & SV471XVT User Manual Chapter 1 Setting Up Your HDTV Finding a Location for Your HDTV  The power consumption of your HDTV is about 144W (AVG) for the SV421XVT and 204W (AVG) for the SV471XVT. o Use the included power cord. o When an extension cord is required, use one with the correct power rating. The 3pronged cord must be grounded and the grounding feature (3rd prong) must not be compromised.  Install your HDTV on a flat surface to avoid tipping.  For proper ventilation, you must allow space between the back of your HDTV and the wall.  Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the service life of the electronic components.  Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent poor ventilation and excessive component damage.  If you want to mount your HDTV on the wall, see below for additional information.  Read this user manual carefully before installing your HDTV. VIZIO offers professional installation services including home networking. Contact VIZIO for more information on these services at 877-MYVIZIO (877-698-4946) or www.VIZIO.com. Wall Mounting your HDTV Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow the instructions below. 1. Remove the stand base and neck: a. Disconnect the cables from your HDTV. b. Place your HDTV face down on a soft, flat surface to prevent damage to the screen. c. Remove the eight (8) screws holding the stand, then lift the stand off your HDTV. Note: To remove the base from the neck, unscrew thumbscrew on bottom. 2. Mount your HDTV on the wall: a. Attach your HDTV to a wall mount (sold separately) using the mounting holes in the back panel of your HDTV. b. Read the instructions that came with your specific wall mount to properly hang your HDTV. Note: Use M6 x 20MM 1.25 pitch screws. 10 www.VIZIO.com