Vtech CS5121-2 User Manual - Page 14

• If, in the future, your telephone service provider requires you to dial the area code when making a local call, or you want to cancel the home area code you have already programmed, reprogram your home area code to 000. • Press CHAN/REMOVE when in the home area code menu to delete the stored home area code. ___ will be displayed. Telephone settings Dial mode If you have touch tone service, the telephone is ready for use as soon as the battery is charged. If you have pulse (rotary) service, you will need to change the dial mode. 1. Press PROG when the handset is not in use. 2. Press or until the screen displays DIAL MODE: and the current setting. 3. Press SELECT. The current setting flashes. 4. Press or to select TONE or PULSE. 5. Press SELECT to confirm your selection. You will hear a confirmation tone. Home area code If you dial your local calls using only seven digits (area code not required), you can program your home area code, following the steps below. By programming your home area code, when you receive a call within your local area, the telephone number will automatically be stored without the area code in the call log. 1. Press PROG when the handset is not in use. 2. Press or until the screen displays HOME AREA CODE. 3. Press SELECT. The stored area code is displayed with the first digit flashing. 4. Use the dial key pad to enter the desired home area code. 5. Press SELECT to confirm. You will hear a confirmation tone. 10 www.vtechphones.com