Vtech EL42308 User Manual - Page 45

Answering system 1. Dial your telephone number from any touchtone telephone. Remote access A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 36) to change it. 2. When the system answers, enter two digit remote access code (19 unless you have changed it). 3. Enter remote commands (see list at right). 4. Hang up to end the call and save all undeleted messages. Play all messages 1 Play new messages 2 Delete the message 3 33 Repeat or go back 4 Stop 5 Skip to next message 6 Press to hear all messages. Press to hear new messages. Press once during playback to delete current message. Press twice to delete all old messages. Press during the caller's message to repeat the message. Press during the beginning of the day and time announcement to go back to the previous message. Press to stop any operation (stop playback, stop recording). Press to skip the current message and advance to next message. NOTE: If you pause for more than four seconds during remote access, you will hear a help menu listing all features and commands. If there is no command entered for another 15 seconds, the call will end automatically. Record announcement *7 to begin recording 5 to stop recording Press *7, ­wait for the beep, then begin speaking. Press 5 to stop recording and hear the playback of new announcement. Help menu *5 Press to hear list of features & commands. Turn system off 0 Press to turn off answering system. Incoming calls will no longer be answered. Turn system on 0 If off, system will answer after 10 rings. Enter your access code, then press 0 to turn the answering system on. Exit Press 8 or hang up to end the 8 remote access call. 41