Weber Summit FT 600 LP Owners Manual - Page 13
Step 7, Assemble back top frame rail
![]() |
View all Weber Summit FT 600 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Position the top frame rail assembly with the tabs to the inside of the cart. Figure 7 (a). Insert the tabs into the front caster frame and front wheel frame, the round tubing of the top frame rail assembly will rest in the cut out portion of the caster frame and wheel frame. (a) Cut out View from the back Top frame rail assembly Step 7 Assemble back top frame rail You will need: one top frame rail #1, one top frame rail #2, one 1/4-20 x 1/2 inch bolt, frame assembly and 7/16 inch or adjustable wrench. Put top frame rail #1 to your left and top frame rail #2 to your right. Insert top frame rail #1 into top frame rail #2. Figure 8 (a). Insert the bolt. Figure 8 (b). Tighten bolt with a 7/16 inch or adjustable wrench. (If you try to insert a bolt and there are no holes, you have top frame rail #2 turned the wrong way. Turn top frame rail #2 around.) Note: Do not use a washer for this step. (a) (b) Front caster frame Fuel scale decal on front side Figure 7 Front wheel frame 1 2 Figure 8 13
![](/manual_guide/products/weber-summit-ft-600-lp-owners-manual-4ff6c6b/13.png)