Weber Summit FT 600 LP Owners Manual - Page 14
Step 8, Bolt front top frame rail assembly
![]() |
View all Weber Summit FT 600 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Position the top frame rail assembly with the tabs to the inside of the cart. Figure 9 (a). Insert the tabs onto the back caster frame and back wheel frame, the round tubing of the top frame rail assembly will rest in the cut out portion of the caster frame and wheel frame. (a) Cut out Back caster frame Top frame rail assembly Back wheel frame Step 8 Bolt front top frame rail assembly You will need: two 1/4-20 x 1/2 inch bolts, two nylon washers, frame assembly and 7/16 or adjustable wrench. Slip a washer over the bolt. Insert the bolt from the inside of the frame assembly into the caster frame. Figure 10 (a). Align the hole in the tab of the top frame rail assembly and start the bolt. Note: If there are no threads for the bolt to thread into: a) you may not have the holes of the frame, and top frame rail tab aligned. b) the tabs of the top rail may not be to the inside of the cart. Refer to Figure 7. Repeat procedure for second bolt. Insert the bolt into the wheel frame and hand tighten. Tighten both bolts with 7/16 or adjustable wrench. View from the back (a) Tab Figure 9 Caster frame Caster frame Figure 10 Wheel frame 14
![](/manual_guide/products/weber-summit-ft-600-lp-owners-manual-4ff6c6b/14.png)