Weider 20ct English Manual - Page 13

22. Locate the Long Cable (72). Attach the Long 22 Cable to the other Small "U"-Bracket (71) with a 1/4" Nylon Locknut (2) and a 1/4" Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. Attach the Small "U"-Bracket (71) to the indicated Weight Tube (63) with a 5/16" x 1 3/4" Bolt (24) and a 5/16" Nylon Locknut (3). 3 63 58 71 2 72 71 24 10 2 23. Route the Long Cable (72) around the 3 1/2" 23 Pulley (15) on the Top Frame (55). Tighten the 3/8" Nylon Locknut (21) and the 3/8" x 2" Bolt (not 55 shown). 15 See inset drawing. Wrap the Long Cable (72) 21 around a 3 1/2" Pulley (15). Attach the Pulley and a Cable Trap (66) to the bracket on the Stabilizer (5) with a 3/8" x 2" Bolt (12) and a 3/8" Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place. 72 72 12 66 15 5 21 5 13