Weider 8525 English Manual - Page 11
Seat Assembly
View all Weider 8525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
19. Remove the indicated 3 1/2" Pulley (15) from the Top Frame (55). 19 Route the Long Cable (23) around the 3 1/2" Pulley (15) and reattach it to the bracket on the Top Frame (55) with the 3/8" x 2" Bolt (12) and the 3/8" Nylon Locknut (21). Make sure that the Cable is in the groove of the Pulley and that the Cable and Pulley move smoothly. 21 55 Bracket 15 12 23 20. Attach the Long Cable (23) to the Small "U"- 20 bracket (67) with a 1/4" Nylon Locknut (2) and a 1/4" Washer (10). See the inset drawing. Do not overtighten the Nylon Locknut; it should be threaded onto the end of the Cable only a couple of turns, as shown. 23 Attach the Small "U"-bracket (67) to the Weight Tube (63) with the 5/16" x 1 3/4" Bolt (72) and a 3 67 5/16" Nylon Locknut (3). 72 10 63 2 23 2 67 Seat Assembly 21 21. Attach the Backrest (41) to the Front Upright (42) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Washers (10). 41 43 10 42 43 10 11