Weider 900 Uk Manual - Page 12
Identify the Short Cable 47.
View all Weider 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
18. Apply grease to an M10 x 78mm Bolt (54). 18 Attach a Pulley Arm (38) to the Upright (3) with the Bolt and an M10 Nylon Locknut (68). Do not overtighten the Nylon Locknut; the Pulley Arm must pivot easily. Route the Press Cable (49) over a 90mm Pulley (34). Attach the Pulley, a Cable Trap (36), an M10 Washer (70), and two Finger Guards (35) to the indicated side of the Pulley Arm (38) with an M10 x 52mm Bolt (52) and an M10 Nylon Locknut (68). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 19. Slide the end of the Press Cable (49) onto the 19 hook on the Right Arm (6). 52 38 35 36 34 70 35 68 Grease 54 68 49 3 49 20. Identify the Short Cable (47). Attach the eyelet on the Cable to the Base (1) with an M10 x 20 70mm Bolt (57), an M10 Washer (70), and an M10 Nylon Locknut (68). Do not overtighten the Nylon Locknut. 6 70 68 1 47 57 12