Weider 900 Uk Manual - Page 8
Insert the Weight Tube 12 into the Weights
View all Weider 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Slide eight Weights (15) onto the Weight 4 Guides (10), with the slot for the Weight Pin (not shown) on the bottom and on the side fac- ing away from the Upright (3). Insert the Weight Tube (12) into the Weights (15). Lubricate the indicated holes in a Weight (15) with grease. Slide the Weight onto the Weight Guides (10). 10 Lubricate 15 3 12 15 5. Attach the Top Frame (4) to the Upright (3) with 5 two M8 x 68mm Bolts (63) and two M8 Nylon Locknuts (69). Do not tighten the Nylon Locknuts yet. Attach the Top Frame (4) between the Weight Guides (10) with an M10 x 155mm Bolt (62), two M10 Washers (70), and an M10 Nylon Locknut (68). Tighten the Nylon Locknuts (68, 69) used in steps 2 and 5. 6. Attach the Seat Frame (8) to the Upright (3) 6 with an M8 x 70mm Carriage Bolt (56) and an M8 Knob (30). 4 70 62 10 70 63 3 69 68 3 56 8 30 8