Weider 9350 Instruction Manual - Page 15

50mm Square Inner Cap (44) 60mm Square Inner Cap (101) This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled. 38mm Square Inner Cap (32) 40mm x 60mm Inner Cap (27) 25mm Square Inner Cap (97) 40mm x 60mm Outer Cap (10) 25mm Retainer (68) 25mm Cover Cap (65) 19mm Round Inner Cap (34) Note: The assembly is divided into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, 4) seat assembly. The hardware for each stage is packaged separately. WAIT UNTIL YOU BEGIN EACH ASSEMBLY STAGE TO OPEN THE PARTS BAG LABELED FOR THAT ASSEMBLY STAGE.