Weider Club 8980 W English Manual - Page 10

Insert the Pull-up Handle into the Top Frame

Get Weider Club 8980 W PDF manuals and user guides View all Weider Club 8980 W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

8. Slide the Top Frame (4) onto the Weight Guides (10). Attach the Top Frame to the Weight Guides 8 with two M8 x 89mm Bolts (64), four M8 Washers (72), two 25mm Spacers (47), and two M8 Locknuts (74). Do not tighten the Locknuts yet. Attach the Top Frame (4) to the Upright (3) with four M10 x 25mm Screws (58). Do not tighten the Screws yet. Attach the Top Cover (15) to the Shroud (13) and Top Frame (4) with two M4 x 16mm Screws (70). Tighten the two M8 Locknuts (74) and the four M10 x 25mm Screws (58). 64 47 72 72 4 58 13 3 58 74 10 70 70 15 9. Slide a Pull-up Cap (39) onto a Pull-up Handle 9 (96). Insert the Pull-up Handle into the Top Frame (4) and press the Pull-up Cap onto the Top Frame. Attach the Pull-up Handle (96) to the Top Frame (4) with two M10 x 80mm Button Bolts (97), two M10 Washers (71), two M10 Split Washers (98), and two M10 Locknuts (73). Repeat this step with the other Pull-up Handle (96). 96 39 97 4 71 98 73 73 96 10. Attach an Eyehook (66) to the Top Frame (4) with 10 an M8 Washer (72) and an M8 Locknut (74). Do not overtighten the Locknut; the Eyehook must rotate freely. Repeat this step with the other Eyehook (66). 74 72 4 66 66 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
10
8.
Slide the Top Frame (4) onto the Weight Guides
(10). Attach the Top Frame to the Weight Guides
with two M8 x 89mm Bolts (64), four M8 Washers
(72), two 25mm Spacers (47), and two M8
Locknuts (74).
Do not tighten the Locknuts yet.
Attach the Top Frame (4) to the Upright (3) with
four M10 x 25mm Screws (58).
Do not tighten
the Screws yet.
Attach the Top Cover (15) to the Shroud (13) and
Top Frame (4) with two M4 x 16mm Screws (70).
Tighten the two M8 Locknuts (74) and the four
M10 x 25mm Screws (58).
9.
Slide a Pull-up Cap (39) onto a Pull-up Handle
(96). Insert the Pull-up Handle into the Top Frame
(4) and press the Pull-up Cap onto the Top
Frame.
Attach the Pull-up Handle (96) to the Top Frame
(4) with two M10 x 80mm Button Bolts (97), two
M10 Washers (71), two M10 Split Washers (98),
and two M10 Locknuts (73).
Repeat this step with the other Pull-up Handle
(96).
10. Attach an Eyehook (66) to the Top Frame (4) with
an M8 Washer (72) and an M8 Locknut (74).
Do
not overtighten the Locknut; the Eyehook
must rotate freely.
Repeat this step with the other Eyehook (66).
8
64
72
47
72
74
4
58
13
10
58
3
70
70
15
9
96
39
4
97
71
73
73
98
96
10
66
66
72
74
4