Weider Club 8980 W English Manual - Page 12

14. Wrap the Press Arm Cable (30) over a 3 1/2" 14 Pulley (24) and route the Cable through the Top Cover (15) as shown. Attach the 3 1/2" Pulley (24) and a Cable Trap (28) to the Top Frame (4) with an M10 x 45mm Bolt (65) and an M10 Locknut (73). Make sure that the Cable Trap is oriented to hold the Press Arm Cable (30) in the groove of the Pulley. 15. Wrap the Press Arm Cable (30) over a 3 1/2" 15 Pulley (24). Attach the Pulley and a Cable Trap (28) to the Top Frame (4) with an M10 x 45mm Bolt (65) and an M10 Locknut (73). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 4 15 73 24 28 30 65 4 73 24 28 65 30 16. Wrap the Press Arm Cable (30) under a 3 1/2" 16 Pulley (24). Attach the Pulley, a Cable Trap (28), and two Half Guards (26) to the Weight Selector (11) with an M10 x 48mm Bolt (62) and an M10 Locknut (73) at the indicated hole. Make sure that the Half Guards are oriented as shown and are on the outside of the Weight Selector. Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 17. Wrap the Press Arm Cable (30) over a 3 1/2" 17 Pulley (24). Attach the Pulley and a Cable Trap (28) to the Top Frame (4) with an M10 x 45mm Bolt (65) and an M10 Locknut (73). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 11 73 62 30 26 28 26 24 28 65 24 30 73 4 12