Weider Club C650 English Manual - Page 12

Press two Plastic Butterfly Bushings 79 and two - cables

Get Weider Club C650 PDF manuals and user guides View all Weider Club C650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

15. Press two Plastic Butterfly Bushings (79) and two 15 Metal Butterfly Bushings (93) into the Right Butterfly Arm (56). Wet the bottom of the Butterfly Lubricate 93 80 Arm with soapy water and slide a Butterfly Foam Pad (66) onto the Arm. 79 97 55 Lubricate a 1/2" x 78mm Bolt (97) and the Plastic Butterfly Bushings (79) with grease. Attach the 79 Right Butterfly Arm (56) to the Butterfly Bracket (55) with the Bolt and a 1/2" Nylon Locknut (94). 93 94 57 Cover the Bolt and Locknut with two Butterfly Caps (80). Do not overtighten the Locknut; the 56 Lubricate 80 Butterfly Arm must be able to pivot easily. Repeat this step with the Left Butterfly Arm (57). 66 16. Attach the Butterfly Backrest (101) to the Center 16 Upright (45) with two M6 Washers (78) and two M6 x 75mm Screws (96). 101 96 78 45 96 78 17. Locate the Medium Cable (69). Route the Cable 17 up through the Weight Guide Top Frame (49) and over a Pulley (87). Attach the Pulley inside the Top Frame with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). 49 34 87 35 89 35 89 92 69 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
12
15. Press two Plastic Butterfly Bushings (79) and two
Metal Butterfly Bushings (93) into the Right
Butterfly Arm (56). Wet the bottom of the Butterfly
Arm with soapy water and slide a Butterfly Foam
Pad (66) onto the Arm.
Lubricate a 1/2" x 78mm Bolt (97) and the Plastic
Butterfly Bushings (79) with grease. Attach the
Right Butterfly Arm (56) to the Butterfly Bracket
(55) with the Bolt and a 1/2" Nylon Locknut (94).
Cover the Bolt and Locknut with two Butterfly
Caps (80).
Do not overtighten the Locknut; the
Butterfly Arm must be able to pivot easily.
Repeat this step with the Left Butterfly Arm
(57).
16. Attach the Butterfly Backrest (101) to the Center
Upright (45) with two M6 Washers (78) and two
M6 x 75mm Screws (96).
15
79
Lubricate
Lubricate
80
97
94
80
55
56
93
93
57
79
66
16
101
78
96
78
96
45
17.
Locate the Medium Cable (69).
Route the Cable
up through the Weight Guide Top Frame (49) and
over a Pulley (87). Attach the Pulley inside the
Top Frame with an M10 x 75mm Bolt (92), two
M10 Washers (35), two 17mm Spacers (89), and
an M10 Nylon Locknut (34).
17
49
69
89
35
35
34
92
89
87