Weider Club C650 English Manual - Page 6

ASSEMBLY Make Things Easier for Yourself Everything in this manual is designed to ensure that the weight bench can be assembled successfully by anyone. However, it is important to realize that the versatile weight bench has many parts and that the assembly process will take time. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • For help identifying small parts, use the PART IDENTIFICATION CHART. The included Allen wrench and the following tools (not included) are required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver • Lubricant, such as grease or petroleum jelly, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before beginning assembly, make sure you 1 understand the information in the box above. For help identifying small parts, use the PART IDENTIFICATION CHART. Attach a Large Base Cap (70) to the Left Base (40) with two M4 x 16mm Screws (36). Attach another Large Base Cap to the other end of the Left Base in the same manner. 39 34 Attach the Left Base (40) to the Center Base (39) with two M10 x 78mm Bolts (32) and two M10 90 Nylon Locknuts (34). Do not tighten the Locknuts yet. 32 70 Repeat this step with the Right Base (not shown). Insert two M10 x 75m Carriage Bolts (90) up 70 through the Center Base (39). 40 36 6