Weider Club C650 English Manual - Page 18

Attach a Small Base Cap 20 to the Bench Base

Get Weider Club C650 PDF manuals and user guides View all Weider Club C650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

32. Attach a Small Base Cap (20) to the Bench Base (3) with two M4 x 16mm Screws (36). Attach 32 another Small Base Cap to the Bench Base in the same manner. Attach the Bench Leg (4) to the Bench Base (3) with four M10 x 68mm Bolts (98), two Leg Plates (25), and four M10 Nylon Locknuts (34). Do not tighten the Locknuts yet. 4 34 3 20 25 98 25 98 20 33. Attach a Small Base Cap (20) to the Stabilizer (2) 33 with two M4 x 16mm Screws (36). Attach anoth- er Small Base Cap to the Stabilizer in the same manner. Attach the Bench Frame (1) to the Stabilizer (2) with two M10 x 58mm Carriage Bolts (77) and two M10 Nylon Locknuts (34). Make sure the decal is in the indicated position. Do not tighten the Locknuts yet. 36 34 1 20 Decal 2 20 34. Attach the Bench Frame (1) to the Bench Leg (4) 34 with four M10 x 68mm Bolts (98), two Notched Plates (24), and four M10 Nylon Locknuts (34). Do not tighten the Locknuts yet. 34 77 36 1 24 4 24 98 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
16
32. Attach a Small Base Cap (20) to the Bench Base
(3) with two M4 x 16mm Screws (36).
Attach
another Small Base Cap to the Bench Base in
the same manner.
Attach the Bench Leg (4) to the Bench Base (3)
with four M10 x 68mm Bolts (98), two Leg Plates
(25), and four M10 Nylon Locknuts (34).
Do not
tighten the Locknuts yet.
33. Attach a Small Base Cap (20) to the Stabilizer (2)
with two M4 x 16mm Screws (36).
Attach anoth-
er Small Base Cap to the Stabilizer in the
same manner.
Attach the Bench Frame (1) to the Stabilizer (2)
with two M10 x 58mm Carriage Bolts (77) and
two M10 Nylon Locknuts (34).
Make sure the
decal is in the indicated position. Do not tight-
en the Locknuts yet.
34. Attach the Bench Frame (1) to the Bench Leg (4)
with four M10 x 68mm Bolts (98), two Notched
Plates (24), and four M10 Nylon Locknuts (34).
Do not tighten the Locknuts yet.
32
33
34
34
98
36
98
20
20
25
25
3
4
36
1
4
24
98
34
24
20
2
Decal
77
1
20
34