Weider Club C650 English Manual - Page 19

35. Attach the Backrest Frames (6) to the Backrest Bracket (16) with four M10 x 45mm Bolts (33), four M10 Washers (35), and four M10 Nylon Locknuts (34). Make sure the Backrest Frames are oriented with the indicated holes closer to the bottom. Do not tighten the Locknuts yet. 36. Attach the Backrest (11) to the Backrest Frames (6) with four M6 x 38mm Screws (99) and four M6 Washers (78). 35 6 35 33 35 36 11 6 34 16 35 33 34 78 99 78 6 99 6 78 37. Insert the Backrest Bracket (16) into the slot in the Bench Frame (1) and engage the Bench Pin (23) into the Bench Frame and one of the holes in the Backrest Bracket. Attach the Backrest Frames (6) to the Bench Frame (1) with an M10 x 156mm Bolt (100), two M10 Washers (35), and an M10 Nylon Locknut (34). Do not overtighten the Locknut; the Bracket Frames must be able to pivot easily. Attach the tether on the Bench Pin (23) to the bottom of the Bench Frame (1) with an M4 x 16mm Screw (36). Tighten the M10 Nylon Locknuts (34) used in steps 32-37. 37 35 16 100 6 36 1 35 34 23 17