Weider Cts 2000 Club Series English Manual - Page 11
Shock, Pivot, Right, Assembled, Bushing
View all Weider Cts 2000 Club Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PAGE 14 WEIDER SPORTING GOODS Insert the bolt on the CYLINDER MOUNTING BRACKET (31) into one of the holes in the STEPPER PEDALS (6) and secure in place with a 3/8" FLAT WASHER (62) and a THREADED KNOB (101). NOTE: There are seven hole locations in the STEPPER PEDALS (6). The Stepper resistance increases as the Cylinder is moved toward the end of the Pedal. Assemble the 1" X 8" LONG FOAM ROLLERS (48) to the upper STEPPER HANDLE BARS (25) and (28) by first wiping a small amount of liquid dish detergent along the upper length of the Handle Bar. This will help in the assembly of the Foam Rollers. When the detergent dries, it will also act as an adhesive. Push the Foam Rollers onto the Handle Bars. u Assemble the STEPPER HANDLE BARS (25) and (28) to the STEPPER UPRIGHT (4) by first orienting the Handle Bars so that the ends with the holes are to the top. 6 30 0 000 00 31 O 000 0 00 c!) 62 101 hit IN:13 Id! Press the lower STEPPER HANDLE BARS (25) and (28) onto the Shock Pivot Tube on the STEPPER UPRIGHT (4) and at the same time assemble the upper Handle Bars into the hole in the Upright. (It may be advisable to obtain the aid of a helper for this assembly.) Assemble the tapered end of the LEFT STEPPER HANDLE BAR (28) into the RIGHT STEPPER HANDLE BAR (25). Align the bolt holes with the hole through the Upright. Secure in place by first assembling a 5116" FLAT WASHER (50) and a 1/2" O.D. X 1/4" LONG METAL BUSHING (109) onto a 5116" X 2 1/2" HEX HEAD BOLT (54) and then bolting through the Upright. Assemble a 1/2" O.D. X 1/2" LONG METAL BUSHING (92) onto the Bolt and then another 5/16" FLAT WASHER (50). Secure with a 5/16" NYLON LOCK NUT (51). 50 51 \ 92 O1 0 --- 48 LEFT 28 109 50 54 4 RIGHT 25 IT DIP STATION 0 SIDE 0 SHOCK PIVOT TUBE 115 (PRE-ASSEMBLED BUSHING) 30 STEPPER SIDE 6 FRONT