Weider Cts 2000 Club Series English Manual - Page 12
Round, Rubber, Washer, Selector, Weight, Plastic, Guide, Bushing, Plate, Front, Pinning, Access
View all Weider Cts 2000 Club Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PAGE 15 WEIDER SPORTING GOODS STEP 3 WEIGHT STACK ASSEMBLY PART NAME 98 2 1/2" O.D. ROUND RUBBER WASHER 99 RUBBER SELECTOR TUBE END PLUG 100 WEIGHT SELECTOR PIN 114 PLASTIC GUIDE BUSHING QTY 2 1 1 24 Orient the GUIDE RODS (9) so that the bolt hole at the end of each Guide Rod is to the top. Insert the Guide Rods into the Guide Rod Plate welded atop the BASE FRAME (1). Onto each GUIDE ROD (9), assemble a 1" I.D. X 2 1/2" O.D. ROUND RUBBER WASHER (98). There are 11 - 10 LB WEIGHT PLATES (10) and 1 - 20 LB. WEIGHT PLATE (113). Into the top side of the 10 LB PLATES (10), press a PLASTIC GUIDE BUSHING (114) at the outside hole positions (Note that "Weider" is cast in the top side of the Plates.) o Working with one 10 LB. WEIGHT PLATE (10) at a time, stack the eleven 10 Lb. Weight Plates onto the GUIDE RODS (9) so the Pinning Access Slot in the Weight Plates is to the front of the unit and to the bottom of each Plate. Once the stack is complete, check again to make sure allPlates are positionedproperly. 0 9 0 0 0 0 0 9 4 2 9 2 9 LUBRICATE 0 9 0 FRONT GUIDE ROD PLATE 114 10 D3R ICD DETAIL A 10 PINNING 0 ACCESS a, SLOT FRONT