Weider Pro 3200 English Manual - Page 10

14. Lubricate an M10 x 80mm Button Head Bolt (97) and both sides of two Plastic Washers (55) with grease. Attach the Right Butterfly Arm (11) to the Butterfly Frame (9) with the Bolt, the two Plastic 14 Lubricate 97 Welded Bushing 55 54 Washers, two Butterfly Caps (54), and an M10 11 Nylon Locknut (70). Do not overtighten the Locknut; the Butterfly Arm must be able to pivot easily. Be sure the indented sides of the 55 Plastic Washers fit over the welded bushing in 54 the Butterfly Arm. Lubricate Repeat this step with the Left Butterfly Arm 70 9 10 (10). 15. Attach the Bumper (25) to the Right Leg (73) with 15 an M4 x 20mm Self-tapping Screw (77) and an M5 Washer (50). Press two 40mm x 50mm Inner Caps (23) into the ends of the Leg Lever (4). Lubricate an M10 x 60mm Bolt (63) with grease. Attach the Leg Lever (4) to the Right Leg (73) with the Bolt and an M10 Nylon Locknut (70). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 16. Press a 50mm x 70mm Inner Cap (22) into the 16 top of the Leg Press Frame (30). Lubricate an M10 x 80mm Bolt (61) with grease. Attach the Leg Press Frame (30) to the Left Base (2) with the Bolt and an M10 Nylon Locknut (70). Do not overtighten the Locknut; the Leg Press Frame must be able to pivot easily. 73 23 Lubricate 70 63 77 25 50 4 23 22 30 70 61 Lubricate 2 10