Weider Pro 3650 English Manual - Page 7

M10 x 65mm Carriage Bolts 110 in the Short Base

Get Weider Pro 3650 PDF manuals and user guides View all Weider Pro 3650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

4. Press a 38mm Square Inner Cap (67) into the 4 Upright Extension (12). Attach the Upright Extension (12) to the Butterfly Upright (3) with two M10 x 95mm Bolts (92), two M10 Washers (91), and two M10 Nylon Locknuts (87). Make sure the warning decals on each side of the Extension are right-side up. Slide the Butterfly Upright (3) onto the two indicated M10 x 65mm Carriage Bolts (110) in the Short Base (2). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet. Tighten an Adjustment Handle (65) into the Butterfly Upright (3). 92 12 67 92 3 87 91 Warning Decal 65 87 5. Press a 50mm x 75mm Inner Cap (58) into the top of the Seat Upright (9). Attach the Leg Lever Bumper (77) to the Seat Upright with an M4 x 20mm Self-tapping Screw (14) and an M4 Washer (120). Slide the Seat Upright (9) onto the two indicated M10 x 65mm Carriage Bolts (110) in the Short Base (2). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet. 87 2 110 5 58 77 14 120 87 9 87 2 6. Hold the Seat Frame (8) between the Seat Upright (9) and the Butterfly Upright (3). Attach the Seat Frame to the Seat Upright with two M10 x 95mm Bolts (92), two M10 Washers (91), and two M10 Nylon Locknuts (87). Do not tighten the Locknuts yet. Attach the Seat Frame (8) to the Butterfly Upright (3) with two M10 x 95mm Bolts (92), two M10 Washers (91), and two M10 Nylon Locknuts (87). Do not tighten the Locknuts yet. Tighten an Adjustment Handle (65) into the Seat Frame (8). 110 6 8 87 87 65 91 92 91 3 9 91 92 91 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
4.
Press a 38mm Square Inner Cap (67) into the
Upright Extension (12).
Attach the Upright Extension (12) to the Butterfly
Upright (3) with two M10 x 95mm Bolts (92), two
M10 Washers (91), and two M10 Nylon Locknuts
(87).
Make sure the warning decals on each side
of the Extension are right-side up.
Slide the Butterfly Upright (3) onto the two indicated
M10 x 65mm Carriage Bolts (110) in the Short Base
(2). Finger tighten an M10 Nylon Locknut (87) onto
each Carriage Bolt.
Do not tighten the Locknuts
yet.
Tighten an Adjustment Handle (65) into the Butterfly
Upright (3).
5.
Press a 50mm x 75mm Inner Cap (58) into the top
of the Seat Upright (9). Attach the Leg Lever
Bumper (77) to the Seat Upright with an M4 x
20mm Self-tapping Screw (14) and an M4 Washer
(120).
Slide the Seat Upright (9) onto the two indicated
M10 x 65mm Carriage Bolts (110) in the Short Base
(2). Finger tighten an M10 Nylon Locknut (87) onto
each Carriage Bolt.
Do not tighten the Locknuts
yet.
7
4
3
65
87
110
87
2
67
92
91
Warning
Decal
87
92
12
5
2
110
87
87
77
14
120
58
9
6
9
92
92
91
3
91
91
91
87
87
65
8
6.
Hold the Seat Frame (8) between the Seat Upright
(9) and the Butterfly Upright (3). Attach the Seat
Frame to the Seat Upright with two M10 x 95mm
Bolts (92), two M10 Washers (91), and two M10
Nylon Locknuts (87).
Do not tighten the Locknuts
yet.
Attach the Seat Frame (8) to the Butterfly Upright
(3) with two M10 x 95mm Bolts (92), two M10
Washers (91), and two M10 Nylon Locknuts (87).
Do not tighten the Locknuts yet.
Tighten an Adjustment Handle (65) into the Seat
Frame (8).