Weider Pro 4950 English Manual - Page 10
Right Top Frame 4 with six M8 x 80mm Bolts - weight
View all Weider Pro 4950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Attach the RIght Top Frame (4) to the Right 7 Upright (2) with two M8 x 80mm Bolts (100), two M8 Washers (103), and two M8 Nylon Locknuts (78). Do not Tighten the Nylon Locknuts yet. 100 103 103 4 78 78 2 8. Attach the Left Top Frame (126) to the Rear 8 Upright (121), the Left Upright (120), and the Right Top Frame (4) with six M8 x 80mm Bolts 100 (100), six M8 Washers (103), and six M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. 4 78 103 100 100 103 126 78 78 78 121 120 9. Orient the Weight Guides (18) with the indicated 9 holes toward the floor. Attach a Weight Guide to the Bottom Center Base (147) with an M10 x 82mm Bolt (84), two M10 Washers (80), two 20mm Steel Spacers (108), and an M10 Nylon Locknut (77). Do not tighten the Nylon Locknut yet. Attach the other Weight Guide (18) in the same manner. Do not tighten the M10 Nylon Locknut yet. Holes 18 18 84 80 108 147 108 80 77 10