Weider Pro 4950 English Manual - Page 26

M10 Nylon Locknuts 77 and M10 x 82mm

Page 26 highlights

62. Attach the Butterfly Cover (30) to the Butterfly Frame (5) with four M4 x 12mm Self-tapping 62 Screws (102). 102 30 5 102 63. Attach a Shroud (21) to the Top Center Frame and Bottom Center Base (148, 147) with four M4 x 12mm Self-tapping Screws (102). Note: It may be necessary to loosen the M10 Nylon Locknuts (77) and the two indicated M10 x 82mm Bolts (84) securing the Top Center Frame and the Weight Guides (18). Attach the other Shroud (21) in the same manner. Attach the Shroud Covers (23) to the Shrouds (21) with six M4 x 16mm Self-tapping Screws (110) and six M4 Washers (104). Tighten any M10 Nylon Locknuts (77) and M10 x 82mm Bolts (84) that were loosened. 63 110 104 77 84 110 104 77 84 148 102 21 23 18 110 104 147 21 110 102 104 23 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

26
63
110
104
104
77
77
84
84
102
102
104
104
110
110
147
23
21
21
23
18
148
110
63. Attach a Shroud (21) to the Top Center Frame
and Bottom Center Base (148, 147) with four
M4 x 12mm Self-tapping Screws (102).
Note: It
may be necessary to loosen the M10 Nylon
Locknuts (77) and the two indicated M10 x
82mm Bolts (84) securing the Top Center
Frame and the Weight Guides (18).
Attach the other Shroud (21) in the same
manner.
Attach the Shroud Covers (23) to the Shrouds
(21) with six M4 x 16mm Self-tapping Screws
(110) and six M4 Washers (104).
Tighten any
M10 Nylon Locknuts (77) and M10 x 82mm
Bolts (84) that were loosened.
62. Attach the Butterfly Cover (30) to the Butterfly
Frame (5) with four M4 x 12mm Self-tapping
Screws (102).
62
30
5
102
102