Weider Pro 4950 English Manual - Page 29

USING THE CURL PAD To use the Curl Pad (33), remove the indicated 50mm Round Inner Cap (39) and insert the Curl Post (11) into the Front Leg (10). Tighten the Curl Adjustment Knob (58) into the Front Leg. Make sure the Curl Adjustment Knob passes through a hole in the Curl Post. When you are performing exercises that do not require the Curl Pad (33), remove the Curl Pad and reinsert the 50mm Round Inner Cap (39) into the Front Leg (10). Note: You must remove the Curl Pad to use the press arms. ADJUSTING THE BACKREST The Backrest (31) can be adjusted to provide the correct position for each exercise. To adjust the Backrest, loosen, but do not remove, the Backrest Adjustment Knob (53) and pull it out. Move the Backrest into or out of the Right Upright (2). Insert the Backrest Adjustment Knob into the Upright and through the Backrest Frame (not shown). Tighten the Backrest Adjustment Knob. The Seats and the other Backrest (not shown) can be adjusted in the same manner. 33 11 39 58 10 2 31 53 LOCKING THE WEIGHT STACK To lock the weight stack, insert the Locking Pin (72) through one of the holes in the Weight Guides (18) and secure the Locking Pin with the Lock (73). 18 72 73 29