Weider Pro 5000 Uk Manual - Page 12

17. Attach a 2 3/4" Pulley (23) to the right Press Arm (8) with an M10 x 53mm Button Bolt (61), two M10 Washers (71), two 5mm Spacers (25), two Finger Guards (27), and an M10 Nylon Locknut (73). See the inset drawing. Orient the finger guards and pulley as shown. Make sure the Press Arm Cable (30) is in the groove of the Pulley. 17 73 25 71 30 27 8 23 27 61 71 25 18. Make sure the Press Arm Cable (30) is routed under the indicated welded rods. Attach a "V"-pulley (22) to the Swivel Arm (16) with an M10 x 64mm Button Bolt (75), two M10 Washers (71), two 5mm Spacers (25), and an M10 Nylon Locknut (73). 18 Welded Rods 73 71 30 16 71 75 25 22 25 27 27 25 19. Attach the Backrest (18) to the Upright (3) with the two M6 x 16mm Screws (60) and the M6 x 19 127mm Screw (79). 18 79 60 60 3 12