Weider Pro 5000 Uk Manual - Page 16

ATTACHING THE LEG LEVER To use the Leg Lever (7), first attach the seat to the resistance system (see ADJUSTING THE SEAT FRAME HEIGHT on page 15). Then, attach the pulley housings to the low pulley station (see ATTACHING THE PULLEY HOUSINGS on page 14). Finally, attach the Extension Cables (31) to an Extension Strap (34) with two Cable Clips (37) and attach the Extension Strap to the Leg Lever with another Cable Clip. Adjust the Extension Strap to the correct length. Note: For less resistance, the Leg Lever can be used with only one Extension Cable attached to it. 7 31 37 37 34 37 31 CABLE DIAGRAM The cable diagram shows the proper routing of the Press Arm Cable (30). Use the diagram to make sure that the Cable has been assembled correctly. If the Cable has not been correctly routed, the weight system will not function properly and damage may occur. The numbers show the correct route for the Cable. Press Arm Cable (30) 7 6 4 3 9 8 5 2 1 16