Weider Pro 9628 English Manual - Page 15
Seat Assembly - cable
View all Weider Pro 9628 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
33. Remove the 3 1/2" Pulley (15) from the Long "U"Bracket (57). Route the Medium Cable (86) around the Pulley in the direction shown. Re-attach the Pulley to the Long "U"-Bracket (57) with the 3/8" x 2" Bolt (12) and the 3/8" Nylon Locknut (21). Make sure the Cable Trap (66) is positioned as shown. 33 86 66 12 57 15 21 34. Attach the closed loop on the end of the Medium 34 Cable (86) to the Top Frame (55) with a 5/16" x 2 3/4" Bolt (11), a 5/16" Flat Washer (8) and a 5/16" Nylon Locknut (3). Make sure the flat side of the closed loop is turned towards the Top Frame. 55 86 8 11 3 Seat Assembly 35 35. Locate and open the parts bag labeled "Seat 41 10 Assembly." Attach the Backrest (41) with the name decal to the 43 Press Upright (56) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Flat Washers (10). 56 10 43 36. Insert the 1/4" x 2 1/2" Carriage Bolt (91) into the center hole in a Seat Plate (37). Attach the Seat Plate to a Seat (13) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2 1/2" Carriage Bolt (91) into the indicated hole in the Press Seat Frame (77). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Flat Washer (10) onto the Carriage Bolt. 36 91 37 77 15 13 18 10 2