Weider Pro 9628 English Manual - Page 16

37. Attach the other end of the Seat (13) to the Press 37 Seat Frame (77) with a 1/4" Flat Washer (10) and a 1/4" x 2 1/2" Screw (43). 77 13 10 43 38. Move to the other end of the unit. Attach the remain- 38 ing Backrest (41) to the Butterfly Upright (42) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Flat Washers (10). 42 41 43 10 39. Press a 1 1/2" Square Inner Cap (32) into the Butterfly Seat Frame (36). Insert the 1/4" x 2" Carriage Bolt (38) into the center hole in a Seat Plate (37). 39 Attach the Seat Plate to the Seat (13) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2" Carriage Bolt (38) into the indicated hole in the Butterfly Seat Frame. Tighten a 1/4" Nylon Locknut (2) with a 1/4" Flat Washer (10) onto the Carriage Bolt. Attach the other end of the Seat to the Butterfly Seat Frame with a 1/4" Flat Washer (10) and the 1/4" x 2 1/4" Screw (24). 36 37 10 24 10 16 13 38 18 32 2