Weider Pro 9628 English Manual - Page 6
Do not tighten the Nylon Locknuts yet. - system
View all Weider Pro 9628 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5. Press a 1" Square Inner Cap (65) into the side arm 5 (A) on the Press Upright (56). Slide the Press Upright (56) onto the 5/16" x 2 1/2" Carriage Bolts (1) in the Press Base (51). Hand tighten a 5/16" Nylon Locknut (3) onto each Carriage Bolt. Do not tighten the Nylon Locknuts yet. 65 A Note: The Press Upright (56) must be leaning towards the center of the unit with the side arm facing outward. 56 3 3 51 1 6. Slide the Butterfly Upright (42) onto the 5/16" x 2 1/2" 6 Carriage Bolts (1) in the Butterfly Base (4). Hand tighten a 5/16" Nylon Locknut (3) onto each Carriage Bolt. Do not tighten the Nylon Locknuts yet. Note: The Butterfly Upright must be leaning towards the center of the unit. 42 3 3 4 1 6
5.
Press a 1” Square Inner Cap (65) into the side arm
(A) on the Press Upright (56).
Slide the Press Upright (56) onto the 5/16” x 2 1/2”
Carriage Bolts (1) in the Press Base (51). Hand tight-
en a 5/16” Nylon Locknut (3) onto each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Press Upright (56) must be leaning
towards the center of the unit with the side arm facing
outward.
5
6
6.
Slide the Butterfly Upright (42) onto the 5/16” x 2 1/2”
Carriage Bolts (1) in the Butterfly Base (4). Hand
tighten a 5/16” Nylon Locknut (3) onto each Carriage
Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Butterfly Upright must be leaning towards
the center of the unit.
6
3
3
65
A
51
56
1
42
4
1
3
3