Weider Ultramax 1033 Owners Manual - Page 10
Lpwerletast
View all Weider Ultramax 1033 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
To use the Curl Pad (26), insert the Curl Upright (27) 26 into the Main Frame (3). Raise the Curl Upright to the desired height, and align one of the holes in the Curl Upright with the hole in the Main Frame. Insert a 27 52 Locking Pin (52) through the Main Frame and the Curl Upright. Rotate the Looking Pin to the locked position, with the Locking Pin clipped onto the Main Frame. To use the Curl Tube (10), place the desired amount of weight on the Leg Lever (8) (see ATTACHING 10 3 8 WEIGHTS TO THE WEIGHT BENCH on page 9). • USING THE HIGH PULLEY STATION To use the high pulley station, insert the Lower Mast (15) into the Main Frame (3) as shown. Using a Cable Clip (33), attach the Long Cable (12) to the Eye Bolt (34) in the Leg Lever (8). Disconnect the Short Cable (13) from the Long Cable. Attach the Lat • Bar (18) to the Long Cable with a Cable Clip (33). 33 12 18 15 34 13 33 3 USING THE LOW PULLEY STATION ,To use the low pulley station, insert the Lpwerletast (15) into the Main Frame (3) as shown. Using a Cable Clip (33), attach the Long Cable (12) to the Eye Bolt (34) in the Leg Lever (8). Attach the Short Cable (13) to the Long Cable with a Cable Clip (33). Attach the Lat Bar (18) to the other end of the Short Cable with a Cable Clip. 1 34 33 33 . 13 15 33 18 3 lo