Weslo Cadence G-40 Treadmill English Manual - Page 6

ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex keys and your own Phillips screwdriver wrench , and needlenose pliers . , adjustable Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some parts may be preattached. To avoid damaging parts, do not use power tools for assembly. Extra hardware may be included. 19mm Tek Screw (26)-6 16mm Screw 19mm Screw (10)-4 (85)-2 #10 x 1" Screw (58)-2 M8 x 15mm Bolt (8)-6 M5 Star Washer (7)-2 M10 Flat Washer (14)-2 M6 Flat Washer (32)-4 M8 Star Washer (5)-6 M8 Nut (46)-2 M8 Flat Washer (72)-4 M6 Nut (43)-4 M8 x 52mm Bolt (82)-2 M6 x 58mm Bolt (13)-4 M10 x 58mm Bolt (2)-4 M10 Star Washer (9)-2 M10 x 110mm Bolt (1)-2 1. Make sure that the power cord is unplugged. Place a piece of cardboard under the tread- 1 26 mill frame to protect the floor during assem- 63 bly. 26 26 63 Have a second person hold the Base (52) in the 63 position shown. 52 26 Attach six Base Pads (63) to the Base (52) with six 19mm Tek Screws (26). 63 26 63 6