Weslo Gym 1000 Uk Manual - Page 11

17. Locate the Short Cable (23). Route the Short Cable through the bracket on the Press Frame (17), as shown. Make sure that the Cable is routed over the crossbar. Hold a 90mm Pulley (15) inside of the bracket on the Press Frame (17). Attach the Pulley to the Press Frame with an M10 x 198mm Bolt (59), two M10 Washers (9), and an M10 Nylon Locknut (21). 17 21 9 Crossbar 17 9 59 Bracket 15 23 18. Wrap the Short Cable (23) around a 90mm Pulley 18 (15). Attach the Pulley and a pair of Pulley Covers (73) to the lower hole in the Front Upright (42) with an M10 x 97mm Bolt (16), an M10 Washer (9), and an M10 Nylon Locknut (21). Make sure that the small tabs on the Pulley Covers are on the side shown. 42 9 21 73 15 73 16 Small Tabs 23 19. Wrap the Short Cable (23) around a 90mm Pulley (15). Attach the Pulley and a pair of Pulley 19 Covers (73) to the upper hole in the Press Frame (17) with an M10 x 87mm Bolt (25), an M10 Washer (9), and an M10 Nylon Locknut (21). Make sure that the large tabs on the Pulley Covers are on the side shown. 23 17 25 15 73 9 73 Large 21 Tabs 20. Wrap the Short Cable (23) around a 90mm Pulley (15). Attach the Pulley and a pair of Pulley 20 Covers (73) to the upper hole in the Front Upright (42) with an M10 x 97mm Bolt (16), an M10 Washer (9), and an M10 Nylon Locknut (21). Make sure that the small tabs on the Pulley Covers are on the side shown. 42 73 21 9 23 15 73 16 Small Tabs 11