Weslo Gym 1000 Uk Manual - Page 12
Seat Assembly
View all Weslo Gym 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
21. Attach the end of the Short Cable (23) to the 21 Long "U"-Bracket (57) with an M8 Nylon Locknut (3) and an M8 Washer (68). Do not completely tighten the Nylon Locknut; it should be threaded onto the end of the Cable until two threads are showing above the Nylon Locknut, as shown in the inset drawing. 3 68 SEAT ASSEMBLY 22 22. Attach the Backrest (41) to the Front Upright (42) with two M6 x 63mm Screws (43) and two M6 Washers (10). 57 23 3 68 57 23 42 41 43 10 12
22. Attach the Backrest (41) to the Front Upright (42)
with two M6 x 63mm Screws (43) and two M6
Washers (10).
SEAT ASSEMBLY
12
22
41
42
10
43
57
3
68
23
23
57
3
68
21
21. Attach the end of the Short Cable (23) to the
Long āUā-Bracket (57) with an M8 Nylon Locknut
(3) and an M8 Washer (68).
Do not completely
tighten the Nylon Locknut; it should be
threaded onto the end of the Cable until two
threads are showing above the Nylon
Locknut, as shown in the inset drawing.