Weslo Gym 1000 Uk Manual - Page 7
Arm Assembly
View all Weslo Gym 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ARM ASSEMBLY 4 4. Press a 25mm Plastic Bushing (26) onto each welded spacer on the Press Frame (17). Slide the Press Frame onto the Base (4) so the Plastic Bushings are aligned with the indicated tube in the base. Note: This will be a tight fit; the Plastic Bushings should fit over the ends of the tube in the Base. Lubricate an M10 x 198mm Bolt (59). Attach the Press Frame (17) to the Base (4) with the Bolt, two M10 Washers (9), and an M10 Nylon Locknut (21). Note: Do not overtighten the Nylon Locknut; the Press Frame must be able to pivot easily. 5. Press a 45mm Square Inner Cap (44) into the top of one of the Press Arms (46). Press a 25mm Round Inner Cap (49) into each end of the handle on the Press Arm. Attach the Press Arm to one side of the Press Frame (17) with two M8 x 63mm Bolts (22) and two M8 Nylon Locknuts (3). Assemble the other Press Arm (46) in the same manner. 4 Tube 5 17 21 9 Lubricate 59 9 Welded Spacers 26 Handle 22 44 49 46 3 17 6. Identify the Left Arm (47) and Right Arm (48). Note the position of the welded bracket on each 6 60 Arm. Arm identification is important for step 7. Press a Butterfly Arm Bushing (60) into each Arm. Welded Brackets 47 48 7