Weslo Momentum G 3.1 Elliptical English Manual - Page 10

9. Identify the Right Pedal Arm (12), which is marked with a sticker. Orient the Right Pedal Arm and one of the Pedals (13) as shown. Attach the Pedal (13) to the Right Pedal Arm (12) with two M8 x 16mm Bolts (52), an M8 x 55mm Bolt (61), three M8 Washers (55), and three M8 Locknuts (58). Attach the other Pedal (13) to the Left Pedal Arm (11) in the same way. 9 13 52 61 11 52 13 12 55 55 58 58 10. Identify the Right Crank Axle (16), which is marked with an “"R.”" 10 Apply grease to the Right Crank Axle (16) and to a Wave Washer (74). Insert the Right Crank Axle (16) into the right Pedal Arm Bracket (44). Next, slide the Wave Washer (74) and a Crank Spacer (75) onto the Right Crank Axle. Firmly tighten the Right Crank Axle (16) clockwise into the right arm of the Crank (18). Then, firmly tighten the two Right Thin Locknuts (36) clockwise onto the Right Crank Axle. Repeat this step on the left side of the elliptical. Note: Turn the Left Crank Axle (not shown) and the Left Thin Locknuts (not shown) counterclockwise to tighten them. 18 75 74 Grease 36 44 16 10