Weslo Momentum G 3.1 Elliptical English Manual - Page 5

PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included. M4 Washer (71)–-2 M5 Washer (77)–-1 M8 Split Washer (63)–-9 M8 Washer (55)–-21 M8 Large Washer (72)–-2 Plastic Washer (27)–-2 M10 Split Washer (78)–-4 M10 Special Washer (80)–-4 Nylon Washer (73)–-4 M10 Washer (62)–-4 Wave Washer (74)–-4 M8 Locknut (58)–-12 Left Thin Locknut (86)–-2 Right Thin Locknut (36)–-2 M10 Locknut (53)–-2 ST4.2 x 12mm Self-tapping Screw (66)–-12 ST4.2 x 20mm Self-tapping Screw (68)–-2 M5 x 20mm Screw (76)–-1 M8 x 20mm Button M8 x 20mm Socket Screw (54)–-3 Screw (57)–-2 M8 x 16mm Bolt (52)–-4 M8 x 40mm Bolt (56)–-4 M8 x 55mm Bolt (61)–-2 M8 x 60mm Button Bolt (87)–-2 M8 x 80mm Button Screw (51)–-4 M10 x 70mm Bolt (60)–-2 5