Weslo Momentum G 3.1 Elliptical English Manual - Page 6

ASSEMBLY •• To hire an authorized service technician to assemble the elliptical, call 1-800-445-2480. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. •• To identify small parts, see page 5. •• In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench pliers Assembly may be easier if you have a socket set or a set of ratchet wrenches. To avoid damaging parts, do not use power tools. 1. Identify the Rear Stabilizer (28), which has a Leveling Cap (33) on each end. 1 While a second person lifts the rear of the Frame (1), attach the Rear Stabilizer (28) to the Frame with two M8 x 80mm Button Screws (51), two M8 Split Washers (63), and two M8 Washers (55). 33 28 55 63 51 55 63 1 33 2. While a second person lifts the front of the Frame (1), attach the Front Stabilizer (10) to the 2 Frame with two M8 x 80mm Button Screws (51), two M8 Split Washers (63), and two M8 Washers (55). 1 10 55 63 51 6