Weslo Pursuit 360r Bike English Manual - Page 10

10. While another person holds the Console (16) near the Upright (13), connect the console wire 10 to the Extension Wire (52). Then, insert the wires downward into the Upright. Attach the Console to the Upright with four M6 x 15mm Button Screws (46). Be careful to avoid pinch- ing the wires. 46 46 16 52 13 Console Wire 11. Identify the Left Pedal (24), which is marked 11 with an "L" sticker. Using an adjustable wrench, firmly tighten the Left Pedal counterclockwise into the left arm of the Crank (21). Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank. IMPORTANT: Tighten both 21 Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For best performance, keep the Pedals tightened. 53 Adjust the left Pedal Strap (53) to the desired position, and press the end of the Pedal Strap onto the tab on the Left Pedal (24). Adjust the right Pedal Strap (not shown) in the same way. Tab 24 12. Make sure that all parts are properly tightened before you use the exercise cycle. After assembly is completed, some extra parts may be left over. Place a mat under the exercise cycle to protect the floor. 10