Weslo Pursuit G 2.8 Bike English Manual - Page 6
Note: The Split Washers
View all Weslo Pursuit G 2.8 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin. Insert the Rear Stabilizer (6) into the Frame (1). Attach the Rear Stabilizer with four M8 x 60mm Button Screws (30). 1 6 30 2. Orient the Front Stabilizer (2) so that the large holes are facing the Frame (1). Attach the Front 2 Stabilizer to the Frame with two M8 x 73mm Button Screws (33). 33 2 3. Attach the Seat (12) to the Seat Post (5) with four M8 Split Washers (42) and four M8 3 Locknuts (10). Note: The Split Washers and the Locknuts may be preattached to the underside of the Seat. 6 Large Holes 1 12 42 42 10 42 5 10
6
1.
Insert the Rear Stabilizer (6) into the Frame (1).
Attach the Rear Stabilizer with four M8 x 60mm
Button Screws (30).
6
30
1
2.
Orient the Front Stabilizer (2) so that the large
holes are facing the Frame (1). Attach the Front
Stabilizer to the Frame with two M8 x 73mm
Button Screws (33).
1
1
2
33
2
Large
Holes
3.
Attach the Seat (12) to the Seat Post (5) with
four M8 Split Washers (42) and four M8
Locknuts (10).
Note: The Split Washers and
the Locknuts may be preattached to the
underside of the Seat.
3
12
5
42
42
42
10
10
To make assembly easier, read the
information on page 5 before you begin.