Whirlpool WDF518SAH Installation Instructions - Page 19

Option B: No Waste disposer-no air gap, Option C: Waste disposer - with air gap

Get Whirlpool WDF518SAH PDF manuals and user guides View all Whirlpool WDF518SAH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

1. Using a hammer and screwdriver, knock 1 plug into disposer. Option C: Waste disposer - with air gap 2. Use needle-nose pliers to remove plug. 2 Screw-type clamps Disposer inlet Air gap Large drain hose clamp Rubber hose connector Drain hose Drain trap 3. Attach drain hose to disposer inlet with Helpful Tip: Remove disposer knockout plug. 3 large 1" (2.5 cm) to 11/2" (3.8 cm) drain hose clamp (not provided). 1 1. Using a hammer and screwdriver, knock plug into disposer. Option B: No Waste disposer-no air gap Waste tee Large drain hose clamp Drain hose 1 Rubber end 2 Drain trap 1. Fit rubber end of drain hose to waste tee. 2. Attach rubber end of drain hose to waste tee with a hose clamp. Use a 1" to 11/2" (2.5 to 3.8 cm) screw-type clamp (not provided). 2 3 Rubber end 4 5 2. Use needle-nose pliers to remove plug. 3. Connect rubber end of drain hose to air gap. 4. Attach rubber end of drain hose to air gap with a hose clamp. Use a 1" to 11/2" (2.5 to 3.8 cm) screw-type clamp (not provided). 5. Use a rubber hose (not provided) with screw-type clamps to connect from air gap to disposer inlet. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
19
1
1.
Using a hammer and screwdriver, knock
plug into disposer.
2
2.
Use needle-nose pliers to remove plug.
3
3.
Attach drain hose to disposer inlet with
large 1" (2.5 cm) to 1±" (3.8 cm) drain
hose clamp (not provided).
Option B: No Waste disposer—no air gap
Waste tee
Large drain
hose clamp
Drain hose
Drain trap
1
Rubber
end
1.
Fit rubber end of drain hose
to waste tee.
2
2.
Attach rubber end of drain hose to
waste tee with a hose clamp. Use a 1"
to 1
1
/
2
" (2.5 to 3.8 cm) screw-type clamp
(not provided).
Helpful Tip:
Remove disposer knockout plug.
1.
Using a hammer and screwdriver, knock
plug into disposer.
2.
Use needle-nose pliers to remove plug.
3.
Connect rubber end of drain hose
to air gap.
4
4.
Attach rubber end of drain hose to air
gap with a hose clamp. Use a 1" to 1
1
/
2
"
(2.5 to 3.8 cm) screw-type clamp
(not provided).
5
5.
Use a rubber hose (not provided) with
screw-type clamps to connect from air
gap to disposer inlet.
Option C: Waste disposer – with air gap
Large drain
hose clamp
Drain hose
Screw-type clamps
Air gap
Rubber hose
connector
Drain trap
Disposer inlet
1
2
Rubber
end
3