Whirlpool WFW72HEDW Use & Care Guide - Page 5

Power, Wash Cycle Knob, Start, Delay Wash, Led Display And Settings, Options, Dispenser Drawer - washer

Page 5 highlights

1 POWER Touch to turn the washer on and off. Touch to stop/cancel a cycle at any time. NOTE: Turning the Wash Cycle knob will also turn the washer on and off. 2 WASH CYCLE KNOB Turn the knob to select a cycle for your laundry load. See "Cycle Guide" for detailed descriptions of cycles. 3 START Touch and hold until the light above START comes on to start a cycle, or touch once while a cycle is in process to pause it. If you want to add a garment, you can touch START when the "Add Garment" LED is on. 4 DELAY WASH Use + and - to delay the start of the wash cycle by up to 12 hours. To turn off Delay Wash, use + and - to set the delay time to "0," or touch POWER. 5 LED DISPLAY AND SETTINGS When you select a cycle, its default settings will light up and the Estimated Time Remaining will be displayed (for times longer than 60 minutes, hours will be displayed, followed by minutes). Factors such as load size, wash temperature, and water pressure may affect the time shown in the display during the cycle. Tightly packing garments, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well. Touch the desired setting along the bottom of the display to adjust. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles. Cycle Status Lights For details, see "Cycle Status Lights" section on the next page. Wash Temp The recommended wash temperature is preset for each cycle. You may also select a wash temperature based on the type of fabric and soils being washed. For best results, follow the garment label instructions. All wash temperatures feature a cold rinse. Spin This washer automatically selects the spin speed based on the cycle selected. Some preset speeds can be changed. • Faster spin speeds mean shorter dry times, but may increase wrinkling in your load. • Slower spin speeds reduce wrinkling, but will leave your load more damp. Soil The Soil setting (wash time) is preset for each wash cycle. For most loads, use this preset soil level. When you change the soil setting, the cycle time will increase or decrease in the Estimated Time Remaining display. For heavily soiled and sturdy fabrics, use the Soil setting to select more wash time. For lightly soiled and delicate fabrics, use the Soil setting to select less wash time. Lower soil level settings will help reduce tangling and wrinkling. 6 OPTIONS Touch to activate additional wash options or additional features on the washer. Not all options are available on all models. A Extra Rinse Activate this option to add an extra rinse to most cycles. B TumbleFresh™ Option The TumbleFresh™ option will periodically tumble the load after the end of the cycle for up to 6 hours to reduce humidity. To turn on the TumbleFresh™ option, touch TumbleFresh. If, however, the TumbleFresh™ option is turned on, it will stay on for all future cycles until turned back off - the washer remembers the last on/off status set. To turn off the TumbleFresh™ option, touch TumbleFresh. You may also activate the TumbleFresh™ option without running a cycle by touching and holding POWER for one second, then touching and holding TumbleFresh for 3 seconds, then touching and holding START for 3 seconds. To turn off the TumbleFresh™ option when it is running, touch POWER. NOTE: The door will lock while the TumbleFresh™ option is active. To cancel the option and unlock the door, touch POWER. C Cycle Signal Use this option to turn on or off the signal that sounds at end of cycle. To turn off the tones that sound when a setting is touched: Touch and hold CYCLE SIGNAL for about 3 seconds. Repeat to turn them on. D Control Lock Touch and hold for 3 seconds to lock the controls to avoid unwanted changes or operation. Touch and hold 3 seconds again to unlock. For each second CONTROL LOCK is held down, the display will count down one second: you will see "3," then "2," then "1." You can still touch START to pause the cycle, or touch POWER to turn off the washer. 7 C B A HE detergent B Liquid fabric softener A C Chlorine bleach 7 DISPENSER DRAWER The dispenser drawer gives you the convenience of automatically adding HE detergent, liquid chlorine bleach, and liquid fabric softener to the wash load at the proper time. See "Using the Dispenser Drawer" for information on using the dispenser drawer. A High Efficiency "HE" detergent compartment This compartment holds liquid or powdered HE detergent for your main wash cycle. B Liquid fabric softener compartment Automatically dilutes and dispenses liquid fabric softener at the optimum time in the cycle. n Use only liquid fabric softener in this dispenser. C Liquid chlorine bleach compartment Automatically dilutes and dispenses liquid chlorine bleach at the optimum time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

5
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
NOTE:
Turning the Wash Cycle knob will also turn the
washer on and off.
WASH CYCLE KNOB
Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
START
Touch and hold until the light above START comes on to start
a cycle, or touch once while a cycle is in process to pause it.
If you want to add a garment, you can touch START when the
“Add Garment” LED is on.
DELAY WASH
Use
+
and
to delay the start of the wash cycle by up to
12 hours. To turn off Delay Wash, use
+
and
to set the delay
time to “0,” or touch POWER.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed (for times
longer than 60 minutes, hours will be displayed, followed
by minutes). Factors such as load size, wash temperature,
and water pressure may affect the time shown in the display
during the cycle. Tightly packing garments, unbalanced loads,
or excessive suds may cause the washer to adjust the cycle
time, as well.
Touch the desired setting along the bottom of the display to
adjust. See “Cycle Guide” for available settings on each cycle.
Not all settings are available with all cycles.
Cycle Status Lights
For details, see “Cycle Status Lights” section on the
next page.
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, follow the garment label instructions. All wash
temperatures feature a cold rinse.
Spin
This washer automatically selects the spin speed based on
the cycle selected. Some preset speeds can be changed.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Soil
The Soil setting (wash time) is preset for each wash
cycle. For most loads, use this preset soil level. When
you change the soil setting, the cycle time will increase
or decrease in the Estimated Time Remaining display.
For heavily soiled and sturdy fabrics, use the Soil setting
to select more wash time. For lightly soiled and delicate
fabrics, use the Soil setting to select less wash time. Lower
soil level settings will help reduce tangling and wrinkling.
OPTIONS
Touch to activate additional wash options or additional
features on the washer. Not all options are available on all
models.
Extra Rinse
Activate this option to add an extra rinse to most cycles.
1
2
3
4
5
6
TumbleFresh
Option
The TumbleFresh
option will periodically tumble
the load after the end of the cycle for up to 6 hours
to reduce humidity. To turn on the TumbleFresh
option,
touch TumbleFresh. If, however, the TumbleFresh
option
is turned on, it will stay on for all future cycles until turned
back off – the washer remembers the last on/off status
set. To turn off the TumbleFresh
option, touch
TumbleFresh.
You may also activate the TumbleFresh
option without
running a cycle by touching and holding POWER for one
second, then touching and holding TumbleFresh
for 3
seconds, then touching and holding START for 3 seconds.
To turn off the TumbleFresh
option when it is running,
touch POWER.
NOTE:
The door will lock while the TumbleFresh
option
is active. To cancel the option and unlock the door, touch
POWER.
Cycle Signal
Use this option to turn on or off the signal that sounds
at end of cycle.
To turn off the tones that sound when a setting is
touched:
Touch and hold CYCLE SIGNAL for about
3 seconds. Repeat to turn them on.
Control Lock
Touch and hold for 3 seconds to lock the controls
to avoid unwanted changes or operation. Touch and
hold 3 seconds again to unlock. For each second
CONTROL LOCK is held down, the display will count
down one second: you will see “3,” then “2,” then “1.”
You can still touch START to pause the cycle, or touch
POWER to turn off the washer.
C
B
D
A
7
High Efficiency “HE” detergent compartment
This compartment holds liquid or powdered HE detergent
for your main wash cycle.
Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric softener
at the optimum time in the cycle.
n
Use only liquid fabric softener in this dispenser.
Liquid chlorine bleach compartment
Automatically dilutes and dispenses liquid chlorine bleach
at the optimum time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
B
C
A
DISPENSER DRAWER
The dispenser drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach,
and liquid fabric softener to the wash load at the proper time.
See “Using the Dispenser Drawer” for information on using
the dispenser drawer.
B
A
HE detergent
Liquid fabric
softener
Chlorine bleach
7
C
A
C
B