Whirlpool WFW97HEXL Owners Manual - Page 11

9. Adjust settings, if desired Normal/Casual 59 Estimated Cycle Time min Press and hold START/PAUSE to begin cycle. Warm/Cold Extra High Normal Temperature Spin Speed Soil Level O Stain Treat 11. Setting a delayed start Normal/Casual Delay Start: 6 hours 5959 EstimaEtestdimated Cycle TCimycele Time min min O 20 hours Use the arrows to increase or decrease the delay start time OK The display will show the default settings for the selected cycle. If desired, press the button beneath each setting to adjust the Temperature, Soil Level, and Spin Speed, and to add options such as an additional Rinse. Use the and arrow keys to page to additional options. For more information on a cycle, press MORE INFO. NOTE: Not all settings are available on all cycles. See "Cycle Guide" for available settings. 10. Select any additional options If you do not want to begin a cycle immediately, you may choose the DELAY START option. This will delay the start of the wash cycle by up to 20 hours. To set a delayed Start: 1. Select the Delay Start option using the LCD control buttons. Use the buttons to adjust the delay time up or down. 2. Press START/PAUSE to set the delay. The delay countdown has started when the START/PAUSE light stops blinking. IMPORTANT: If you are using the Delay Wash option, use of the dispenser cartridge is recommended, or powdered detergent may be used in the HE powdered detergent compartment. 12. Press and hold START/PAUSE to begin wash cycle Press the FanFresh button or EcoBoost button to add these options to the selected cycle. If FanFresh is selected, the washer will automatically activate the vent fan and tumble the load periodically for up to 16 hours. This is useful if you are unable to remove a load immediately after the cycle has finished. The EcoBoost™ option provides additional energy savings through reduced hot water usage and maintains cleaning performance by lengthening the wash time on some cycles. NOTE: Not all options are available with all cycles. Press and hold the START/PAUSE button to start the wash cycle. To pause a cycle in progress, press the START/PAUSE button once, then press and hold again to continue the cycle. To cancel a cycle, press the POWER button. Once you press and hold START/PAUSE, you will hear the door lock, unlock, and lock again. The washer door will remain locked during the wash cycle. Unlocking the door to add garments: If you need to open the door to add 1 or 2 missed garments, you may do so while "Door Locked - To unlock and add a garment, press START/Pause button" is displayed. Press START/PAUSE once; the door will unlock once the washer movement has stopped. This may take several minutes. Then close door and press START/PAUSE again to restart the cycle. 11