Whirlpool WFW97HEXL Owners Manual - Page 9

Add HE detergent to dispenser, Precision Dispense Ultra cartridge, Powdered HE detergent, single- - installation

Page 9 highlights

Using the Precision Dispense Dispenser To use the dispenser drawer: 1. Open the dispenser drawer. 2. Add laundry products as described in steps 3-6. 3. Slowly close the dispenser drawer. Make sure it is completely closed. NOTE: A small amount of water may remain in the dispensers from the previous wash cycle. This is normal. 3. A dd HE detergent to dispenser Precision Dispense Ultra cartridge Powdered HE detergent single-load compartment Tab Use only HE High Efficiency liquid detergents. The dispenser cartridge will hold about 20 oz. (590 ml) of HE liquid detergent, or enough for up to 36 loads†. To Fill: Pull back on the tab and lift the fill door. Fill to the "MAX" line with HE liquid detergent. Close fill door. It will click into place. Use only High Efficiency (HE) detergent. To Install the Dispenser Cartridge: 1. Pull out the dispenser drawer. 2. Insert the dispenser cartridge completely in detergent compartment as shown. It should click into position. 3. Slowly slide the dispenser drawer in until it is completely closed. The washer will automatically detect the dispenser cartridge. 4. Adjust the detergent concentration and water hardness settings, if needed. Default settings are 2x detergent concentration and normal water hardness. If the detergent concentration is not listed on the package, see "About Detergent Concentration" to calculate the concentration. To Adjust Dispenser Settings: 1.Press PRECISION DISPENSE. 2. S elect the desired settings using the LCD control buttons. NOTE: n T he dispenser cartridge should be rinsed out when changing detergents or when the washer will not be used for extended periods. For instructions on cleaning the dispenser cartridge, see "Washer Maintenance". † The number of loads will vary, depending on detergent concentration, load size, cycle used, and soil level. The maximum capacity of up to 36 loads requires use of 6x concentration detergent. Lift out the cartridge and set aside. Place a measured amount of detergent in the powdered HE detergent compartment. Powdered HE detergent compartment Use only High Efficiency (HE) detergent. Powdered detergent: Add directly to the compartment. IMPORTANT: • Do not use liquid detergents in the single-load compartment; liquid detergents may seep out of the detergent compartment before the main wash begins. • If you are using the Delay Wash option, use of the dispenser cartridge is recommended, or powdered detergent may be used in the HE powdered detergent compartment. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

9
Using the Precision Dispense Dispenser
3.
Add HE detergent to dispenser
Powdered detergent:
Add directly to the
compartment.
Lift out the cartridge and set aside.
Place a measured amount of detergent
in the powdered HE detergent
compartment.
Use only High Efficiency
(HE) detergent.
Precision Dispense Ultra cartridge
Powdered HE detergent
single-load compartment
IMPORTANT:
• Do not use liquid detergents in the single-load
compartment; liquid detergents may seep out of the
detergent compartment before the main wash begins.
• If you are using the Delay Wash option, use of the
dispenser cartridge is recommended, or powdered
detergent may be used in the HE powdered detergent
compartment.
Powdered HE
detergent
compartment
To use the dispenser drawer:
1.
Open the dispenser drawer.
2.
Add laundry products as described in steps 3–6.
3.
Slowly close the dispenser drawer. Make sure it is
completely closed.
NOTE:
A small amount of water may remain in the dispensers
from the previous wash cycle. This is normal.
Tab
Use only HE High Efficiency
liquid detergents. The dispenser cartridge
will hold about 20 oz. (590 ml) of HE liquid
detergent, or enough for up to 36 loads
.
To Fill:
Pull back on the tab and lift the fill
door. Fill to the “MAX” line with
HE liquid detergent. Close fill door.
It will click into place.
To Install the Dispenser Cartridge:
1.
Pull out the dispenser drawer.
2.
Insert the dispenser cartridge completely in detergent
compartment as shown. It should click into position.
3.
Slowly slide the dispenser drawer in until it is completely
closed. The washer will automatically detect the
dispenser cartridge.
4.
Adjust the detergent concentration and water hardness
settings, if needed. Default settings are 2x detergent
concentration and normal water hardness. If the
detergent concentration is not listed on the package,
see “About Detergent Concentration” to calculate the
concentration.
To Adjust Dispenser Settings:
1.
Press PRECISION DISPENSE.
2.
Select the desired settings using the
LCD control buttons.
NOTE:
n
The dispenser cartridge should be rinsed out when
changing detergents or when the washer will not be used
for extended periods. For instructions on cleaning the
dispenser cartridge, see “Washer Maintenance”.
The number of loads will vary, depending on detergent concentra°on,
load size, cycle used, and soil level. The maximum capacity of up to
36 loads requires use of 6x concentra°on detergent.
Use only High
Efficiency (HE)
detergent.