Xerox 5400DT User Guide - Page 75

Symptom: Dark spots or marks, Symptom: Unfused or partially fused image, Possible causes and solutions

Get Xerox 5400DT - Phaser B/W Laser Printer PDF manuals and user guides
UPC - 042215485470
View all Xerox 5400DT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Troubleshooting Symptom: Dark spots or marks There are dark spots or marks on the page in a random pattern. Possible causes and solutions:  The paper path may be contaminated with toner. Print several blank sheets of paper to remove the toner accumulations.  The Laser Print Cartridge may be defective. Replace the Laser Print Cartridge.  The fuser may be defective. Replace the fuser (in the Maintenance Kit).  The Bias Transfer Roll may be defective. Replace the Bias Transfer Roll (in the Maintenance Kit). 3925-67 Symptom: Unfused or partially fused image The printed image is not fully fused to the paper and easily rubs off. Possible causes and solutions:  The paper stock may be damp. Replace the paper stock.  Heavy or unusual paper stock may be in the tray. Replace that paper with approved media. If you need to use heavy card stock, make sure that the fuser temperature is set correctly for that paper type; refer to the Advanced Features and Troubleshooting Manual for more information. 3925-68  The fuser may be defective. Replace the fuser (in the Maintenance Kit).  Make sure that the printer is located in the recommended environment for temperature (between 10 to 32 degrees C) and relative humidity (between 15 percent to 85 percent). Move the printer to a suitable area, away from air conditioning vents, open loading docks, etc. User Guide 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
User Guide
59
Troubleshooting
Symptom: Dark spots or marks
There are dark spots or marks on the page in a random pattern.
Symptom: Unfused or partially fused image
The printed image is not fully fused to the paper and easily rubs off.
Possible causes and solutions:
The paper path may be contaminated with
toner. Print several blank sheets of paper to
remove the toner accumulations.
The Laser Print Cartridge may be defective.
Replace the Laser Print Cartridge.
The fuser may be defective. Replace the fuser
(in the Maintenance Kit).
The Bias Transfer Roll may be defective.
Replace the Bias Transfer Roll (in the
Maintenance Kit).
Possible causes and solutions:
The paper stock may be damp. Replace the
paper stock.
Heavy or unusual paper stock may be in the
tray. Replace that paper with approved media.
If you need to use heavy card stock, make sure
that the fuser temperature is set correctly for
that paper type; refer to the
Advanced Features
and Troubleshooting Manual
for more
information.
The fuser may be defective. Replace the fuser
(in the Maintenance Kit).
Make sure that the printer is located in the
recommended environment for temperature
(between 10 to 32 degrees C) and relative
humidity (between 15 percent to 85 percent).
Move the printer to a suitable area, away from
air conditioning vents, open loading docks, etc.
3925-67
3925-68