Xerox 750DX 5750 Administrator Guide - Page 110

44-4 Administering the DocuColor After this Setup screen: This message: Frame Type selection (Network Protocol Setup/ IPX/SPX Setup) Can't detect Token Ring hardware. Token Ring hardware not installed or not functioning. Invalid frame size. Warning! IPX network number is zero. Token Ring Setup Can't autodetect the ring speed. No device on ring. Frame Type selection (Network Protocol Setup> IPX/SPX Setup) Invalid frame size. Warning! IPX network number is zero. Enable NDS (Network Service Setup>PServer Setup>NDS Setup) No NDS trees found. Means: DocuColor queries the Token Ring hardware. Error indicates that some components are not installed, are not installed correctly, or not installed in the correct device. An unsupported Token Ring board may be in use. Check with your authorized service/support center. The network hub is not connected to a Novell machine when the DocuColor tries to bind. No other IPX machine can be found on the network, or the network hub is not connected to the network, when the DocuColor tries to bind. When this occurs, the network number defaults to zero. The DocuColor is trying to detect the current ring speed, but it is the only machine on the Token Ring network. Connect another machine to the Token Ring network first, before connecting the DocuColor. The network hub is not connected to a Novell machine when the DocuColor tries to bind. No other IPX machine can be found on the network, or the network hub is not connected to the network, when the DocuColor tries to bind. When this occurs, the network number defaults to zero. No NDS trees were found on the Novell network. Check that IPX frame types are properly set.