Xerox 750DX 5750 Administrator Guide - Page 27
Back view of the DocuColor
UPC - 042215455060
View all Xerox 750DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
11-13 Ethernet cable connection Back view of the DocuColor Centronics-type parallel connector AUI connector for thinnet and thicknet RJ-45 connector for twisted pair Ethernet Serial port SCSI connector for external CD-ROM drive Slot for 100BaseT option Copier connector slot Slots for Token Ring option Power switch ! Shut down the DocuColor before connecting it to any network device. NOTE: Do not attach the cable to more than one Ethernet connector on the DocuColor at one time. If the Token Ring option is installed, you can attach an unshielded twisted pair cable to the RJ-45 connector on the Token Ring board and attach a second cable to the RJ-45 Ethernet connector. For more information on Token Ring, see Appendix A. TO USE THINNET CABLE: 1. With the DocuColor turned off, connect the transceiver to the AUI connector on the back of the DocuColor. Press down on the latch to lock the transceiver connection. 2. Connect the thinnet cable to the BNC connector on the transceiver. 3. Configure network servers for printing and then proceed to Setup.